INNOVV Power Hub 1 was developed to meet customer's needs......
A customer writes...... "
INNOVV, Can you guys develop a power management box to get a reliable
switched power source for your motorcycle camera and other devices
installed on my motorcycle? It should be simple, solid build, and
reasonably priced. Most of the similar products that are available are
over complicated and over priced. Thank you, Eric William.
Reduce the clutter of battery wires by
using this unique switched power hub to easily connect up to 5 devices.
The "Power Hub1" will manage the power supply to your expensive devices
when the vehicle is turned on and off. Innovv designed a voltage stabilizing
feature by adding a 10 second power on delay to allow the system to
provide the full power needed to your devices. The voltage to your
devices is protected by using individual fuse connectors.
Simple design and solidly built.
Rain proof and dust proof!
Compact size, 64.2mm x 39mm x 40mm, (2.5” x 1.5” x 1.6”)
1 x 40A inline fuse for input,
5 x 5A inline fuse for output
Connecting devices is made easy with Posi-Lock Connectors!
Wires and connection
Ignition trigger- yellow wire (145cm/57”)- connect to switched power source like head light, trial light, horn.
This wire is sending electrical signal to trigger power supply for 5 red positive (+) out put leads.
Positive(+) power lead (Input)- Red wire (47cm/18 ½”)- connect to the positive point on battery from bike.
Ground(-) (Input)- Black wire (47cm/18 ½”)- connect to ground point on battery or frame of bike
Positive(+) power lead (output)- Red wire (33cm/13”)- connect to the positive lead of the device
Ground(-) (output)- Black wire (33cm/13”)- connect to the ground lead of all devices
For a complete review of the PowerHub 1 by WebBikeworld, click here!