SW Motech-flush-mount 12-volt Cigarette-style socket with fused battery hookup harness

Part Number: CPA.00.006.103

12-volt Cigarette-style socket with fused cable harness. Includes a weatherproof cap and flush-mount hardware. The included ATC fuse is 5 amps; device and harness is rated for a maximum current of 30 amp. The cable length is 150cm or approximately 59".
Standard flush mounting requires drilling a large hole (typically in the fairing/dash), however most riders use the Optional aluminum mounting bracket (pn CPA.00.006.160). This bracket can be used on most 7/8 inch handlebar top clamps. Hole spacing will not allow for mounting on oversize handlebars (eg, 1 inch, 1 1/8 inch diameter.)

• This is an ideal way to add a 12 volt plug to your motorcycle to power a GPS, Mini air compressor, or many countless items that have a cigarette lighter plug.
• Note: This item fits most motorcycles with 7/8" handlebars so if you have other motorcycles this will work as long as you have 7/8" bar mount triple clamps and a battery to connect.