 |
 |
 |
|
Fenix Cree High Intensity LED motorcycle running lights are among the brightest we've seen. And being LEDs, they draw only a tiny bit of power. This is especially good news for bikes with low wattage alternators. Even better, Cree LED lights cost only a fraction of competing LED lamp brands. These lights will really make your bike stand out in traffic, day or night and being seen means staying alive!
What's really cool about the controller box in this kit, is you can wire
the box directly to your battery or fuse block without a switch. When
you start your bike, the controller senses the temporary voltage drop at
the battery and switches the lights to "on". After you shut off your
bike, the controller knows this too and shuts down your CREE lights
about 20 seconds after the ignition is switched off. How cool is
THAT?! If you want to fit a switch so you can turn off the lights
while riding (can you say "stealth mode"?) that's easy. Just install a
switch rated at .75 amps or better on the red wire positive feed to the
control box. And if you want to be really clever you can add a switch to
run the lights in a dimmed mode. In that event install a switch from a
positive feed like your headlight circuit, to the white wire at the
control box.
This pair of high intensity LED running lights come with four Cree LED emitters each, and each LED is focused with a multifaceted reflector. The lamps are also supplied with a light gauge sheet metal swivel bracket for easy mounting just about anywhere. Kit includes two lamps with mounting brackets, a controller box and some additional wiring with quick disconnects. The wattage draw of these lamps is so small, there is no need to wire them up with a relay, or even a switch for that matter. Just wire them up to a switched circuit...... easily done with one of our fuseblocks!!
Dimensions:
Each light pod is 7cm in width, 4cm in depth, and all aluminum casing.
These LED running lights can be fitted to just about any motorcycle or scooter as they draw less than 0.7 amps! That's quite remarkable. A pair of these high intensity LED lamps draw a combined wattage that is only 2/3 of a typical single incandescent brake (1157) light bulb.
Tech Specs: Supply Voltage 9 to 32 volts DC, Power Rating Appx. .75A,
Light Output 600 Lumens (650 Lux) per lamp, Color Temp 6000K, Life
Expectancy > 50,000 hours
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Info
Key Features
Small design perfect for Motorcycles (70mm Diameter x 42mm Depth)
Four ultra bright Cree LEDs per unit... 2 x 600 Lumen
Colour Temperature 6000K....Similar to HID
Easy to fit design with adjustable angle
Wide angle visibility
Weather proof
Ultra low power....0.74A at 14.5V
Ultra long life.....more than 50,000hrs
1 Year Warranty
Sourced by Motorcycle Innovations to give you some of the brightest LED Driving lights at a inexpensive pricing
E Marked, CE, Sealed to IP44 and ROHS Certified
Contains:
2 Cree LED Running Lights and Mounting Brackets
Wiring Harness complete with fuse and controller
Fitting Instructions
Cable ties to keep wires tidy
|
|
|
|
|
|
|
led driving lights v2 
Cree High Intensity LED Driving Lights V2 
